本帖最后由 yu2n 于 2014-9-2 11:53 编辑
翻出一个老脚本……
USB存储设备控制 By Yu2n
XP系统测试通过,需要管理员权限。
在下次插拔设备时生效,无须重启。- 'USB_Stock_Block.vbs
- '===========================================================================================
- CheckOS ' 检查操作系统版本
- CheckMeState ' 检查程序运行状态
- main ' 执行主程序
-
- '===========================================================================================
- '主函数
- Sub main()
- Dim wso, windir, EnableUSB
- Set wso = CreateObject("WScript.Shell")
- Set objNetwork = CreateObject("wscript.network")
- strComputer = objNetwork.ComputerName
-
- If wso.Popup(VbCrLf & "禁用 USB 存储设备,请按“确定”"& VbCrLf & _
- VbCrLf & "启用 USB 存储设备,请按“取消” (6秒后自动取消)" _
- , 6, "USB 存储设备控制 - 主菜单", 48+4096+1) = 1 Then
- EnableUSB = 0
- Else
- EnableUSB = 1
- End If
-
- If Exist( "C:\windows\system32\cmd.exe" ) Then windir = "windows"
- If Exist( "C:\winnt\system32\cmd.exe" ) Then windir = "winnt"
-
- If EnableUSB = 1 Then
- wso.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\WriteProtect","1","REG_DWORD" '禁止写入
- wso.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Start","3","REG_DWORD" '启用USBStor
-
- Move "C:\" & windir & "\inf\usbstor.pnf_" , "C:\" & windir & "\inf\usbstor.pnf"
- Move "C:\" & windir & "\inf\usbstor.inf_" , "C:\" & windir & "\inf\usbstor.inf"
- Move "C:\" & windir & "\system32\drivers\usbstor.sys_" , "C:\" & windir & "\system32\drivers\usbstor.sys"
-
- If (Not Exist( "C:\" & windir & "\inf\usbstor.pnf_" )) And (regKeyRead( "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Start" ) = 3 ) Then
- wso.Popup VbCrLf & "启用 USB 存储设备成功。 ", 5, "USB 存储设备控制 - 操作完成", 64+4096
- Else
- wso.Popup VbCrLf & "启用 USB 存储设备失败。 ", 5, "USB 存储设备控制 - 操作完成", 16+4096
- End If
- Else
- wso.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\WriteProtect","1","REG_DWORD" '禁止写入
- wso.RegWrite "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Start","4","REG_DWORD" '禁用用USBStor
-
- Move "C:\" & windir & "\inf\usbstor.pnf" , "C:\" & windir & "\inf\usbstor.pnf_"
- Move "C:\" & windir & "\inf\usbstor.inf" , "C:\" & windir & "\inf\usbstor.inf_"
- Move "C:\" & windir & "\system32\drivers\usbstor.sys" , "C:\" & windir & "\system32\drivers\usbstor.sys_"
-
- If (Not Exist( "C:\" & windir & "\inf\usbstor.pnf" )) And (regKeyRead( "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USBSTOR\Start" ) = 4 ) Then
- wso.Popup VbCrLf & "禁用 USB 存储设备成功。 ", 5, "USB 存储设备控制 - 操作完成", 64+4096
- Else
- wso.Popup VbCrLf & "禁用 USB 存储设备失败。 ", 5, "USB 存储设备控制 - 操作完成", 16+4096
- End If
- End if
-
- Set wso = Nothing
- End Sub
-
- '===========================================================================================
- '小函数
- Function Exist( strPath )
- 'On Error Resume Next
- Set fso = CreateObject("Scripting.FileSystemObject")
- If ((fso.FolderExists( strPath )) Or (fso.FileExists( strPath ))) then
- Exist = True
- Else
- Exist = False
- End if
- Set fso = Nothing
- End Function
- Sub Move( strSource, strDestination )
- On Error Resume Next
- If Exist( strSource ) Then
- Set fso = CreateObject("Scripting.FileSystemObject")
- If (fso.FileExists(strSource)) Then fso.MoveFile strSource, strDestination
- If (fso.FolderExists(strSource)) Then fso.MoveFolder strSource, strDestination
- Set fso = Nothing
- Else
- WarningInfo "警告", "找不到 " & strSource & " 文件!", 2
- End If
- If Not Exist( strDestination ) Then WarningInfo "警告", "移动失败,无法移动 " & VbCrLf & strSource & " 至" & VbCrLf & strDestination, 2
- End Sub
- Function regKeyRead( strKey )
- Set wso = CreateObject("WScript.Shell")
- regKeyRead = wso.RegRead( strKey ) 'strKey = "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\DocTip"
- Set wso = Nothing
- End Function
-
- '===========================================================================================
- '是否重复运行
- Sub CheckMeState()
- If IsRun( WScript.ScriptFullName ) Then
- Set wso = CreateObject("WScript.Shell")
- If wso.Popup("程序已运行,请不要重复运行本程序!" & VbCrLf & VbCrLf & _
- "退出已运行程序,请按“确定”,否则请按“取消”。(3秒后自动取消)" _
- , 3, "警告", 1) = 1 Then
- KillMeAllRun
- End If
- Set wso = Nothing
- 'WarningInfo "警告:", "程序已运行,请不要重复运行本程序!!", 1
- WScript.Quit
- End If
- End Sub
- ' 检测是否重复运行
- Function IsRun(appPath)
- IsRun=False
- For Each ps in GetObject("winmgmts:\\.\root\cimv2:win32_process").instances_
- 'IF Lcase(ps.name)="mshta.exe" Then
- IF Lcase(ps.name)="wscript.exe" Then
- IF instr(Lcase(ps.CommandLine),Lcase(appPath)) Then i=i+1
- End IF
- next
- if i>1 then
- IsRun=True
- end if
- End Function
- '终止自身
- Function KillMeAllRun()
- Dim MeAllPid
- Set pid = Getobject("winmgmts:\\.").InstancesOf("Win32_Process")
- For Each ps In pid
- 'if LCase(ps.name) = LCase("mshta.exe") then
- IF Lcase(ps.name)="wscript.exe" Or Lcase(ps.name)="cscript.exe"Then
- IF instr(Lcase(ps.CommandLine),Lcase(WScript.ScriptFullName)) Then MeAllPid = MeAllPid & "/PID " & ps.ProcessID & " "
- end if
- next
- Set wso = CreateObject("WScript.Shell")
- wso.Run "TASKKILL " & MeAllPid & " /F /T", 0, False
- Set wso = Nothing
- Set pid = Nothing
- End Function
-
- '===========================================================================================
- '检查操作系统版本
- Sub CheckOS()
- Dim os_ver
- os_ver = GetSystemVersion
- If os_ver >= 60 Or os_ver <= 50 Then
- Msgbox "不支持该操作系统! ", 48+4096, "警告"
- WScript.Quit ' 退出程序
- End If
- End Sub
- '取得操作系统版本
- Function GetSystemVersion()
- Dim os_obj, os_version, os_version_arr
- Set os_obj = GetObject("winmgmts:").InstancesOf("Win32_OperatingSystem")
- For Each os_info In os_obj
- os_version = os_info.Version
- If os_version <> "" Then Exit For
- Next
- Set os_obj = Nothing
- os_version_arr = Split( os_info.Version, ".")
- GetSystemVersion = Cint( os_version_arr( 0 ) & os_version_arr( 1 ) )
- End Function
复制代码
|