[原创] VBS硬件信息 Hardware_Info.vbs

fastslz

代码没有技术水准，网上搜索有一大堆类似代码，关键是中文描述方式
支持多个硬盘、显卡、内存、声卡、网卡，CPU超频识别
支持cmd调用

'Hardware_Info.vbs v1.1 BY: fastslz    http://bbs.bathome.net
On Error Resume Next
Dim WMI,WS,Fso
Set WMI = GetObject("Winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
Set cOSs = WMI.ExecQuery("Select * from Win32_OperatingSystem")
For Each oOS in cOSs
	OSx = oOS.Caption &" " & oOS.CSDVersion  & vbCrLf
Next
BBx= "————————————主板信息————————————"  & vbCrLf
Set Board = WMI.InstancesOf("Win32_BaseBoard")
Set Bios = WMI.InstancesOf("Win32_Bios")
For Each oBoard In Board
BBx = BBx _
    & "主板名称: " & oBoard.Product &vbTab & oBoard.Version & vbCrLf _
    & "制造厂商: " & oBoard.Manufacturer                    & vbCrLf 
Next
For Each oBios In Bios
BBx = BBx _
    & "BIOS厂商: " & oBios.Manufacturer                     & vbCrLf _
    & "BIOS日期: " & FormatDateTime(wDate(Trim(oBios.ReleaseDate)),1)  & vbCrLf _
    & "BIOS版本: " & oBios.SMBIOSBIOSVersion & vbCrLf _
    & "OEM 版本: " & oBios.Version           & vbCrLf
Next
Set Bios = Nothing:Set Board  = Nothing

CPUx = "———————————处理器信息———————————"  & vbCrLf
Set CPUs = WMI.InstancesOf("Win32_Processor")
Set Caches = WMI.InstancesOf("Win32_CacheMemory")
For Each ObjCPU In CPUs
MCS = ObjCPU.MaxClockSpeed :CCS = ObjCPU.CurrentClockSpeed
If ObjCPU.MaxClockSpeed Mod 2 = 1 Then MCS = CCS + 1
If ObjCPU.CurrentClockSpeed Mod 2 = 1 Then CCS = CCS + 1
OC = QOC(CCS,MCS)
If (OC-MCS) >  10 and (OC-MCS) > 0 Then OCLC = "  超频比率: " & FormatPercent((OC-MCS)/MCS)
If (OC-MCS) < -10 and (OC-MCS) < 0 Then OCLC = "  降频比率: " & FormatPercent((OC-MCS)/MCS)
CPUx = CPUx _
     & "CPU 名称: " & Trim(ObjCPU.Name)                & vbCrLf _
     & "CPU 构架: " & ObjCPU.Description               & vbCrLf _
     & "制造厂商: " & ObjCPU.Manufacturer              & vbCrLf _
     & "接口规格: " & ObjCPU.SocketDesignation         & vbCrLf _
     & "CPU 数量: " & ObjCPU.CpuStatus                 & vbCrLf _
     & "核心数量: " & ObjCPU.NumberOfCores             & vbCrLf _
     & "线程数量: " & ObjCPU.NumberOfLogicalProcessors & vbCrLf _
     & "地址位宽: " & ObjCPU.AddressWidth & " Bit"     & vbCrLf _
     & "数据位宽: " & ObjCPU.DataWidth    & " Bit"     & vbCrLf _
     & "CPU 电压: " & ObjCPU.CurrentVoltage / 10 & "V" & vbCrLf _
     & "外部频率: " & ObjCPU.ExtClock  & " MHz"        & vbCrLf _
     & "当前频率: " & OC               & " MHz" & OCLC & vbCrLf _
     & "原始频率: " & MCS              & " MHz"        & vbCrLf _
     & "CPU 使用: " & ObjCPU.LoadPercentage  & "%"     & vbCrLf 
Next
Function QOC(CCS,MCS)
    If CCS = MCS Then
        Set wReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
        wReg.GetDWORDValue &H80000002,"HARDWARE\DESCRIPTION\System\CentralProcessor\0","~MHz",strValue
        OC = strValue :Set wReg = Nothing
        Else
        OC = CCS
    End If
    QOC = OC :If QOC Mod 2 = 1 Then QOC = QOC + 1
End Function
For Each ObjCache In Caches
    If objCache.MaxCacheSize > 0  Then
        Select Case objCache.Purpose
        case "L1-Cache"
        CPUx = CPUx & "一级缓存: " & objCache.MaxCacheSize & "KB    (L1数据＋L1缓存)" & vbCrLf
        case "L2-Cache"
        CPUx = CPUx & "二级缓存: " & objCache.MaxCacheSize & " KB" & vbCrLf
        case "L3-Cache"
        CPUx = CPUx & "三级缓存: " & objCache.MaxCacheSize & " KB" & vbCrLf
        End Select
    End If
Next
Set Caches = Nothing:Set CPUs = Nothing

Memx = "————————————内存信息————————————" & vbCrLf
Set Memorys = WMI.InstancesOf("Win32_PhysicalMemory")
Set MemKY = WMI.InstancesOf("Win32_OperatingSystem")
For Each aKY In MemKY
    ZL = aKY.TotalVisibleMemorySize
    KY = aKY.FreePhysicalMemory
Next
Mems = 0:Memc = 0
Types = Array("Unknown","Other","DRAM","Synchronous DRAM","Cache DRAM","EDO","EDRAM","VRAM","SRAM", "RAM", _
               "ROM","Flash","EEPROM","FEPROM","EPROM","CDRAM","3DRAM","SDRAM","SGRAM","RDRAM","DDR","DDR2")
For Each Mem In Memorys
    For i = 0 To UBound(Types)
        If Mem.MemoryType = i Then MemType = Types(i) :End If
    Next
    For j = 0 To 6
        Select Case Mem.Tag
            case "Physical Memory " & j
            Mems = Mems+(Mem.Capacity)
            Memx = Memx  &"插槽" & Mem.DeviceLocator & ": " & Round(Mem.Capacity/1048576) &" MB  " _
                         & MemType & "-" & Mem.Speed & "MHz" & " 数据带宽" & Mem.DataWidth _
                         & "Bit" & " 总带宽" & Mem.TotalWidth &"Bit" & vbCrLf
        End Select
    Next
Next
Memx = Memx _
     & "内存安装: "& Round(Mems/1048576)&" MB " & vbCrLf _
     & "内存总量: "& Round(ZL/1024)& " MB" & vbCrLf _
     & "内存可用: "& Round(KY/1024)& " MB" & vbCrLf _  
     & "内存使用率: " &FormatPercent((ZL-KY)/ZL)& vbCrLf
Set Memorys = Nothing:Set MemKY = Nothing

Vx= "————————————显卡信息————————————"  & vbCrLf
Set cVID = WMI.ExecQuery("SELECT DeviceID FROM Win32_VideoController")
For Each oVID In cVID
    Set Video = WMI.ExecQuery("SELECT * FROM Win32_VideoController WHERE DeviceID='"& oVID.DeviceID &"'")
    For Each oVideo In Video
        Vx = Vx _
        & "显卡名称: " & oVideo.Name                                    & vbCrLf _
        & "制造厂商: " & oVideo.AdapterCompatibility                    & vbCrLf _
        & "物理显存: " & Round(oVideo.AdapterRAM/1048576)&" MB "        & vbCrLf _
        & "显示模式: " & oVideo.CurrentHorizontalResolution &" X " _
                       & oVideo.CurrentVerticalResolution   &" "_
                       & oVideo.CurrentBitsPerPixel         &"Bit " _
                       & oVideo.CurrentRefreshRate          &"Hz"     & vbCrLf 
    Next
Next
Set Video = Nothing:Set cVID = Nothing

Dx= "————————————硬盘信息————————————"  & vbCrLf
Set IDE = WMI.ExecQuery("Select * from Win32_DiskDrive WHERE InterfaceType='IDE'")
Set cPPP = WMI.ExecQuery("SELECT * FROM Win32_PerfRawData_PerfDisk_PhysicalDisk")
For Each oIDE In IDE
    For i = 0 To IDE.Count
        Select Case oIDE.Index
            Case i
               For Each oPPP In cPPP
                   If InStr(oPPP.Name, i) Then vName = oPPP.Name
               Next
               Dx = Dx & "硬盘" & i &"型号:" & oIDE.Caption                   & vbCrLf _
               & vbTab & "标称容量: "    & Round(oIDE.Size/1000000000) &" GB" & vbCrLf _
               & vbTab & "实际容量: "    & Round(oIDE.Size/1073741824) &" GB" & vbCrLf _
               & vbTab & "柱面数: "      & oIDE.TotalCylinders                & vbCrLf _
               & vbTab & "磁头数: "      & oIDE.TotalHeads                    & vbCrLf _
               & vbTab & "每道扇区数: "  & oIDE.SectorsPerTrack               & vbCrLf _
               & vbTab & "扇区大小: "    & oIDE.BytesPerSector                & vbCrLf _
               & vbTab & "总扇区数: "    & oIDE.TotalSectors                  & vbCrLf _
               & vbTab & "分区状态: "    & vName  & vbCrLf
               DevID = Replace(oIDE.DeviceID, "\", "\\")
               Set cDP = WMI.ExecQuery("ASSOCIATORS OF {Win32_DiskDrive.DeviceID="""& DevID &"""}" _
               & "WHERE AssocClass = Win32_DiskDriveToDiskPartition")
               For Each oDP In cDP
                 Set cLD = WMI.ExecQuery("ASSOCIATORS OF {Win32_DiskPartition.DeviceID="""& oDP.DeviceID &"""}" _
                 & "WHERE AssocClass = Win32_LogicalDiskToPartition")
                   For Each oLD In cLD
                     Dx = Dx _
                        & vbTab & oLD.DeviceID &" " & Left(oLD.VolumeName&"         " ,11) & Left(oLD.FileSystem&"   " ,6) & "共:" _
                        & Right("    "&Round(oLD.Size/1073741824,1),6)                &" GB    可用:" _
                        & Right("    "&Round(oLD.FreeSpace/1073741824,1),6)           &" GB    已用:" _
                        & Right("    "&Round((oLD.Size-oLD.FreeSpace)/1073741824,1),6)&" GB" & vbCrLf
                   Next
              Next 
        End Select
    Next
Next
Set cLD = Nothing:Set cDP = Nothing:Set IDE = Nothing:Set cDP = Nothing:Set cPPP =  Nothing

Sx= "————————————声卡信息————————————"  & vbCrLf
Set cSD = WMI.ExecQuery("SELECT * FROM Win32_SoundDevice")
For Each oSD In cSD
    Sx = Sx & "声卡名称: " & oSD.ProductName  & vbCrLf
Next
Set cSD = Nothing
Nx= "————————————网卡信息————————————"  & vbCrLf
Set cNet = WMI.ExecQuery("Select * from Win32_NetworkAdapter WHERE PhysicalAdapter ='TRUE'")
If CStr(cNet.Count) < 0 Then
    Set cNet = WMI.ExecQuery("Select * from Win32_NetworkAdapter WHERE PNPDeviceID Like 'PCI%%' or PNPDeviceID Like 'USB%%'")
    For Each oNet In cNet
        If oNet.NetConnectionStatus > 0 Then
           Nx = Nx & "网卡名称: "& oNet.Name & vbCrLf
           Else
           Nx = Nx & "网卡名称: "& oNet.Name & vbCrLf
        End If
    Next
    Else
    For Each oNet In cNet
        If oNet.NetEnabled = TRUE Then
           Nx = Nx & "网卡名称: "& oNet.Name & vbTab & "活跃状态" & vbCrLf
           Else
           Nx = Nx & "网卡名称: "& oNet.Name & vbTab & "空闲状态" & vbCrLf
        End If
    Next
End If
Set cNet = Nothing

If (Lcase(Right(Wscript.FullName,11)) = "wscript.exe") Then
    MsgBox OSx & BBx & CPUx & Memx ,,"Hardware_Info.vbs v1.0 BY: fastslz"
    MsgBox Vx & Sx & Nx  ,,"Hardware_Info.vbs v1.0 BY: fastslz"
    MsgBox Dx ,, "Hardware_Info.vbs v1.0 BY: fastslz"
    MsgN = MsgBox ("是否保存到文件？" , 32+4 , "Hardware_Info.vbs v1.0 BY: fastslz")
    If MsgN = 6 Then JZCSx = JZCS :wInfo
    Else
    WScript.Echo OSx & BBx & CPUx & Memx & Vx & Sx & Nx & Dx
End If
Set WMI = Nothing

Sub wInfo()
    Set WS = CreateObject("WScript.Shell")
    Set Fso = CreateObject("Scripting.FileSystemObject")
    aFile = WS.CurrentDirectory &"\"& WS.ExpandEnvironmentStrings("%COMPUTERNAME%")&"_Hardware_Info.txt"
    Set HInfo = Fso.CreateTextFile(aFile , True)
    HInfo.WriteLine "Hardware_Info.vbs BY: fastslz  http://bbs.bathome.net"
    HInfo.WriteLine OSx & BBx & CPUx & Memx & Vx & Sx & Nx & Dx & JZCSx
    HInfo.Close
    WS.Run Chr(34) & aFile & Chr(34)
Set WS = Nothing:Set Fso = Nothing:Set HInfo = Nothing
End Sub

Function wDate(nD)
    If Not IsNull(nD) Then
    wDate = CDate(Mid(nD,5,2)&"/"&Mid(nD,7,2)&"/"&Left(nD,4)&" "&Mid(nD,9,2)&":"&Mid(nD,11,2)&":"&Mid(nD,13,2))
    End If
End Function

Function JZCS()
    NumMsg = vbCrLf & "———————————简易CPU基准测试———————————" & vbCrLf
    Dim I,T1,T2,Tempvalue,aRunTime,bRunTime
    T1 = Timer()
    For I = 1 To 2000000
        Tempvalue= 2^0.5
    Next
    T2 = Timer()
    aRunTime = FormatNumber((T2-T1)*1000,2)
    NumMsg =  NumMsg & "CPU 200万次开方计算所需时间：" &aRunTime&" 毫秒" & vbCrLf
    T1 = Timer()
    For I = 1 To 6000000
        Tempvalue= 1 + 1
    Next
    T2 = Timer()
    bRunTime = FormatNumber((T2-T1)*1000,2)
    NumMsg =  NumMsg & "CPU 600万次加法计算所需时间："&bRunTime&" 毫秒" & vbCrLf
    JZCS = NumMsg
End Function
复制代码

fastslz

cmd调用方法

@echo off
for /f "delims=*" %%a In ('Cscript //Nologo "Hardware_Info.vbs"^|find ":"') do echo %%a

:在第二个硬盘第一个分区新建Backup文件夹
for /f "tokens=2,*" %%a In ('Cscript //Nologo "Hardware_Info.vbs"^|findstr  "分区状态"') do (
    if %%a#==1# for /f "tokens=1" %%i In ("%%b") do MD "%%i\Backup")
pause
复制代码

Hardware_Info.vbs BY: fastslz  http://bbs.bathome.net
..................................
————————————主板信息————————————
主板名称: P5QL PRO        Rev 1.xx
制造厂商: ASUSTeK Computer INC.
BIOS厂商: American Megatrends Inc.
BIOS日期: 2009年7月1日
BIOS版本: 1004   
OEM 版本: _ASUS_ - 7000901
———————————处理器信息———————————
CPU 名称: Intel(R) Core(TM)2 Quad CPU    Q8300  @ 2.50GHz
CPU 构架: Intel64 Family 6 Model 23 Stepping 10
制造厂商: GenuineIntel
接口规格: LGA775
CPU 数量: 1
核心数量: 4
线程数量: 4
地址位宽: 64 Bit
数据位宽: 64 Bit
CPU 电压: 1.3V
外部频率: 402 MHz
当前频率: 3000 MHz  超频比率: 20.00%
原始频率: 2500 MHz
CPU 使用: 2%
一级缓存: 128KB    (L1数据＋L1缓存)
二级缓存: 4096 KB
————————————内存信息————————————
插槽DIMM0: 2048 MB  DDR-1066MHz 数据带宽64Bit 总带宽64Bit
插槽DIMM2: 2048 MB  DDR-1066MHz 数据带宽64Bit 总带宽64Bit
内存安装: 4096 MB
内存总量: 4095 MB
内存可用: 2039 MB
内存使用率: 50.22%
————————————显卡信息————————————
显卡名称: NVIDIA GeForce GT 220
制造厂商: NVIDIA
物理显存: 512 MB
显示模式: 1440 X 900 32Bit 60Hz
————————————声卡信息————————————
声卡名称: NVIDIA High Definition Audio
声卡名称: Realtek High Definition Audio
声卡名称: NVIDIA High Definition Audio
声卡名称: NVIDIA High Definition Audio
声卡名称: NVIDIA High Definition Audio
————————————网卡信息————————————
网卡名称: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller        活跃状态
————————————硬盘信息————————————
硬盘1:        Maxtor 6L080P0 ATA Device        固件: BAJ41G20
        标称容量: 82 GB        实际容量: 76 GB
        柱面数: 9964        磁头数: 255
        每道扇区数: 63        扇区大小: 512
        总扇区数: 160071660
        分区状态: 1 J: K:
                .....................................
硬盘0:        ST3500418AS        固件: CC49
        标称容量: 500 GB        实际容量: 466 GB
        柱面数: 60801        磁头数: 255
        每道扇区数: 63        扇区大小: 512
        总扇区数: 976768065
        分区状态: 0 C: D: E:
                .....................................
———————————简易CPU基准测试———————————
CPU 200万次开方计算所需时间：593.75 毫秒
CPU 600万次加法计算所需时间：375.00 毫秒

极品小猫

这个太给力了, 没想到找个自动改移动设备盘符的方法还发现了这么好的东西

yu2n

WMI，不错。

zzh197206

很不错的东西

9zhmke

网卡那一段有些冗杂，一是可以精简点，二则是判断活跃网卡那里是不是写错了？
If CStr(cNet.Count) < 0 Then....应该写成 If CStr(cNet.Count) < 1 Then

这一段可以精简成：
On Error Resume Next
Set cNet = WMI.ExecQuery("Select * from Win32_NetworkAdapter WHERE PNPDeviceID Like 'PCI%%' or PNPDeviceID Like 'USB%%'")
For Each oNet In cNet
  If CStr(cNet.Count) > 0 Then
      Nx = Nx & "网卡名称: "& oNet.Name & vbTab & "活跃状态" & vbCrLf
  Else
      Nx = Nx & "网卡名称: "& oNet.Name & vbCrLf
  End If
Next
On Error goto 0
Set cNet = Nothing

fastslz

回复 6# 9zhmke


    开始我也是不绕弯弯的，这样做只是因为多个网卡状态下区分，正在使用中的网卡即活跃空闲状态