批处理之家 - Powered by Discuz! Board

标题: [文本处理] 如何提取文本内的指定行内容？ [打印本页]

作者: pls 时间: 2016-3-24 13:22 标题: 如何提取文本内的指定行内容？

本帖最后由 pcl_test 于 2016-3-24 13:37 编辑

51201 09:16:26.159, 2016-03-12 P_EPHY_ERRC_INTRAF_MEAS_REPORT_IND
Message content
{
source-id
{
      L1c
      [0]HLP
}
dest-id
{
      ERRC
      [0]EMCFE
}
P_EPHY_ERRC_INTRAF_MEAS_REPORT_IND_param_v2
{
      ssfn_cycle : 70 [0x0046]
      ssfn : 3872 [0x0f20]
      trans_id : 1 [0x0001]
      objectId : 1 [0x0001]
      carrier_freq : 65300 [0xff14]
      neigh_cell_num : 0 [0x0000]
      _0_neighcell_meas_result_ast : 32[0x0020] items
      {
         0
         {
            phy_cell_id : "invalid" [0xffff]
            rsrp_report_ind : 0 [0x0, 0(1 bits)]
            rsrq_report_ind : 1 [0x1, 1(1 bits)]
            spare : 1 [0x0001, 00000000 000001(14 bits)]
            rsrp : 0.500 dBm [0x0005]
            rsrq : -0.100 dB [0xffff]
         }
         1
         {
            phy_cell_id : "invalid" [0xffff]
            rsrp_report_ind : 1 [0x1, 1(1 bits)]
            rsrq_report_ind : 1 [0x1, 1(1 bits)]
            spare : 16383 [0x3fff, 11111111 111111(14 bits)]
            rsrp : -0.100 dBm [0xffff]
            rsrq : -0.100 dB [0xffff]
         }
         2
         {
            phy_cell_id : "invalid" [0xffff]
            rsrp_report_ind : 1 [0x1, 1(1 bits)]
            rsrq_report_ind : 1 [0x1, 1(1 bits)]
            spare : 16383 [0x3fff, 11111111 111111(14 bits)]
            rsrp : -0.100 dBm [0xffff]
            rsrq : -0.100 dB [0xffff]
         }
         3
         {
            phy_cell_id : "invalid" [0xffff]
            rsrp_report_ind : 1 [0x1, 1(1 bits)]
            rsrq_report_ind : 0 [0x0, 0(1 bits)]
            spare : 0 [0x0000, 00000000 000000(14 bits)]
            rsrp : -1 dBm [0xfff6]
            rsrq : 12 dB [0x0078]
         }
         4
         {
            phy_cell_id : "invalid" [0x0f1f]
            rsrp_report_ind : 0 [0x0, 0(1 bits)]
            rsrq_report_ind : 0 [0x0, 0(1 bits)]
            spare : 16325 [0x3fc5, 11111111 000101(14 bits)]
            rsrp : 0.500 dBm [0x0005]
            rsrq : -0.100 dB [0xffff]
         }

文档里有很多这样的类似的代码，想把带时间那行和3大括号里的” rsrq : “这行提取出来，请支招。

作者: happy886rr 时间: 2016-3-24 13:47

回复 1# pls

@echo off
type test.txt|findstr /r "[012][0-9]:[0-5][0-9]:[0-5][0-9]"
type test.txt|findstr /i /r /c:"rsrq : [0-9]* dB \[0x[0-9]*\]"
pause>nul
复制代码

欢迎光临批处理之家 (http://www.bathome.net/)